More items from this sellerView All
1756-IF16H Rockwell AB ControlLogix 10 communication module.
1756-IF16H Rockwell AB ControlLogix 10 communication module.1756 Series Model No: 1756-IF16H. The Allen-Bradley 1756-IF16H input module is a ControlLogix HART type of analog input module. It is used to connect a Logix controller to an industrial machine system. The 1756-IF16H analog input module operates by receiving signals from process value transmitter devices and converting them into measurement values such as temperature or pressure values that the Logix controller can use. It is designed to be mounted in a ControlLogix chassis with an RTB or removable terminal block that hosts all of its field side wiring. The 1756-IF16H analog input module has a separate HART modem for each input channel.
Description
PRODUCT INFORMATION OF 1756-IF16H Rockwell AB Control Logix 10 communication module.
| Input, current | Yes |
| Input, voltage | Yes |
| Input, resistor | No |
| Input, resistance thermometer | No |
| Input, thermocouple | No |
| Input signal, configurable | Yes |
| Output, current | No |
| Output, voltage | No |
| Output signal configurable | No |
| Analogue inputs configurable | Yes |
| Analogue outputs configurable | No |
| Type of electric connection | Screw-/spring clamp connection |
| Wire type | Copper |
| Terminal block torque specifications | 1756-TBCH: 0.5 Nm (4.4 lb.in) |
| Input conversion method | Successive approximation |
| Module keying | Electronic, software configurable |
| Offset drift | 27 µV/°C |
| Output conversion method | R-Ladder DAC, monotonicity with no missing codes |
| Input range | 0…20 mA, 4…20 mA |
| Data format | Integer mode (left justified, 2 s complement) IEEE 32-bit floating point |
| Wire category | 2 – on signal ports |
| Overvoltage protection | 8V DC maximum |
| Common mode noise rejection | >90 dB @ 50/60 Hz (15 Hz and 20 Hz filters only) |
| Normal mode noise rejection | 74 dB @ 50/60 Hz (15 Hz filter) 90 dB @ 60 Hz (20 Hz filter) |
| Module error | 0.3% of range |
| Gain drift with temperature | 11 ppm/°C |
| Module input scan time, min | 11…328 ms (filter dependent) |
| Voltage and current ratings | Backplane: 5.1V DC @ 200 mA, 24V DC @ 125 mA, Input current range: 0…20 mA, 4…20 mA |
| Total backplane power | 4.02 W |
| Thermal dissipation | 12 BTU/h |
| Inputs | 16 differential, current dedicated HART modem per channel |
| Power dissipation | 6 W maximum |
| Resolution | 16 to 21 Bit |
| Wire size | Single wire connection (1756-TBCH): 0.33…2.1 mm² (22…14 AWG) solid or stranded shielded copper wire, rated at 105 °C (221 °F) or greater, 1.2 mm (3/64 in.) insulation maximum, Single wire connection (1756-TBS6H): 0.33…2.1 mm² (22…14 AWG) solid or |
| Calibrated accuracy | Better than 0.13% of range (all filters) |
| Open circuit detection time | Positive full scale reading within 5 s |
| Module HART scan time | Estimate 1 s if all channels are HART enabled |
| Suitable for safety functions | No |
0.0 Average Rating Rated (0 Reviews)