More items from this sellerView All
Description
PRODUCT INFORMATION OF Keyence laser displacement sensor controller LK-G3001.
| Model | LK-G3001*1 | |||
| Type | Separate monitor model*2 | |||
| Display | Head compatibility | All LK-G sensor heads are compatible | ||
| Number of connectable sensors | Maximum of 2 units | |||
| Minimum display unit | 0.01 µm | |||
| Display range | ±9,999.99 mm to ±9,999.99 µm (Selectable from six levels) | |||
| Refresh rate | 10 times/sec | |||
| Terminal block | Analog voltage output | ±10 V x 2 outputs, output impedance: 100 Ω | ||
| Analog current output | 4 to 20 mA x 2 outputs, maximum load resistance: 350 Ω | |||
| Timing input | For OUT1, non-voltage input | |||
| Reset input | ||||
| Auto-zero input | ||||
| Laser remote interlock input | Non-voltage input | |||
| Comparator output | For OUT1, NPN open-collector output | |||
| Alarm output | For OUT1, NPN open-collector output (N.C.) | |||
| Expansion connector | Timing input | For OUT2, non-voltage input | ||
| Reset input | ||||
| Auto-zero input | ||||
| Program switching input | Non-voltage input x 3 inputs | |||
| Laser-Off input | For Head A/Head B, non-voltage input | |||
| Comparator output | For OUT2, NPN open-collector output | |||
| Alarm output | For OUT2, NPN open-collector output (N.C.) | |||
| Binary | Binary output | Measured data output (21 bits), OUT1/OUT2 selectable, NPN open-collector output | ||
| Strobe output | NPN open-collector output | |||
| Binary selector output | ||||
| Binary selector input | Non-voltage input | |||
| RS-232C interface | Measured data output and control input/output (Maximum baud rate: 115,200 bps, selectable) | |||
| USB interface | In conformity with USB Revision 2.0 Full speed (USB1.1 compatible) | |||
| Major functions | 2 OUT simultaneous measurement, Operation, Averaging, Filter, Calibration, Measurement, AUTO ZERO, Sampling frequency setting, Mutual interference prevention, Data storage, 8-program memory, ECO mode, ABLE setting, Target setting, ABLE tuning, Selection of measurement surface of transparent target, Statistics processing, Connection of setting support software, Selectable head-mounting, etc. |
|||
| Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less | ||
| Current consumption | 500 mA or less with 1 head/600 mA or less with 2 heads | |||
| Environmental resistance | Ambient temperature | 0 to +50 °C 32 to 122 °F | ||
| Relative humidity | 35 to 85 % RH (No condensation) | |||
| Weight | Approx. 370 g | |||
0.0 Average Rating Rated (0 Reviews)