More items from this sellerView All
LC1D620M7C Schneider LC1D three-level AC contactor AC24 220V 380V.
Schneider LC1D three-level AC contactor LC1D620M7C AC24 220V 380V.LC1D AC Contactor Model No:LC1D620M7C.LC1D620M7C is a 3-level contactor of TeSysD series, suitable for controlling various types of motors at an ambient temperature below 60°C, the maximum operating altitude is 3000m without derating, and the maximum operating frequency is 2400 times/hour. The control coil provides an AC voltage of 220V 50 /60Hz is used to control the on and off of the contactor. The front of the product provides IP20 protection to prevent direct finger contact. The product has passed CCC certification. Flexible and simple installation methods can be clamped on 2X35mm rails or directly screwed on the bottom plate.
Description
PRODUCT INFORMATION OF SCHNEIDER LC1D three-level AC contactor LC1D620M7C AC24 220V 380V.
| Product Series | TeSys Deca |
|---|---|
| Product Series | TeSys Deca |
| product type | Contactor |
| product short name | LC1D |
| Application field of contactor | Applied to non-inductive or micro-inductive loads, and resistance furnaces to AC loads with a power factor greater than or equal to 0.95 |
| use category | AC- 3AC-1 |
| number of poles | 3P |
| Rated working voltage [Ue] | Power circuit: <= 1000 V AC 25…400 Hz Power circuit: <= 460 V DC |
| Rated operating current [Ie] | 1000 A 40 °C) at <= 440 V AC AC-1 for power circuits 620 A 40 °C) at <= 440 V AC AC-3 for power circuits |
| [Uc] control circuit voltage | 230V AC 50/60Hz |
| Motor power (kW) | 200 kW at 220/240 V AC 50/60 Hz (AC-3) 335 kW at 380/400 V AC 50/60 Hz (AC-3) 375 kW at 415 V AC 50/60 Hz (AC-3) 400 kW at 440 V AC 50/60 Hz (AC-3) 400 kW at 500 V AC 50/60 Hz (AC-3) 450 kW at 660/690 V AC 50 /60 Hz (AC-3) 450 kW at 1000 V AC 50/60 Hz (AC-3) |
| model | LC1D |
| Loop contact type | 3 NO |
| protection cap | None |
| Conventional thermal current [Ith] | 1000 A at <40 °C for power circuits |
| Rated short-time withstand current [Icw] | 5050 A at <40 °C – 10 s for power circuit 4400 A at <40 °C – 30 s for power circuit 3400 A at <40 °C – 1 min for power circuit 2200 A at <40 °C – 3 minutes for power circuits 1600 A at <40 °C – 10 minutes for power circuits |
| Fuses for use with relays | 800 A gG at <= 440 V for power circuits 630 A aM at <= 440 V for power circuits 1000 A gG at <= 440 V for power circuits |
| average impedance | 0.12 mΩ – Ith 1000 A 50 Hz for power circuits |
| Rated insulation voltage [Ui] | Power circuit: 1000 V conforming to IEC 60947-4-1 |
| Overvoltage category | III |
| pollution level | 3 |
| Rated impulse withstand voltage [Uimp] | 8 kV according to IEC 60947 |
| Mechanical life | 5 Mcycles |
| Electrical life | 0.33 Mcycles 1000 A AC-1 Ue <= 440 V 0.8 Mcycles 640 A AC-3 Ue <= 440 V 0.6 Mcycles 470 A AC-3 Ue 660/690 V |
| Control loop characteristics | AC at 50/60 Hz |
| Control voltage limit | 0.85…1.1 Uc -5…55 °C operating 40…400 Hz 0.25…0.5 Uc -5…55 °C releasing 40…400 Hz |
| (~50Hz pickup) power consumption (VA) | 1650 VA 50 Hz 0.9 20 °C) 1650 VA 60 Hz 0.9 20 °C) |
| (~50Hz hold) power consumption (VA) | 22 VA 50 Hz 0.9 20 °C) 22 VA 60 Hz 0.9 20 °C) |
| heat dissipation | 22W |
| action time | 40…80 ms closed 100…200 ms open |
| operating frequency | 1200 cycles/h at <55 °C |
| Wiring capacity | Control circuit: Bolt fastening Cable selection: Flexible wire without wire terminal Control circuit: Bolt fastening Cable selection: Flexible wire with wire terminal Control circuit: Bolt fastening Cable selection: Single solid wire without wire Wire terminal Power circuit: Bus bar terminal Cable selection: Solid wire without wire terminal Bus bar cross section: 60 x 5 mm |
| Tightening torque | Control circuit: 1.2 Nm Power circuit via bolts : 58 Nm Power circuit via busbar terminals : 58 Nm via cable connector |
| Auxiliary contact type | Does not contain |
| installation method | Rail installation |
| standard | GB 14048.4 IEC 60947-4-1 |
| certified product | CCC CE |
| ambient air temperature | -40…60 °C operation 60…70 °C with derating -60…80 °C storage |
| working altitude | 3000 m None |
| Shock and vibration resistance | Shock resistance with contacts open (2 gn (5…300 Hz)) conforming to IEC 60068-2-6 Shock resistance with contacts closed (4 gn (5…300 Hz)) conforming to IEC 60068-2-6 Shock performance 11 ms with contacts closed (15 gn) conforming to IEC 60068-2-27 Shock resistance 11 ms with contacts open (6 gn) conforming to IEC 60068-2-27 |
| high of LC1D620M7C | 304 mm |
| width of LC1D620M7C | 309 mm |
| depth of LC1D620M7C | 255 mm |
| Product Weight of LC1D620M7C | 20.1kg |
0.0 Average Rating Rated (0 Reviews)