More items from this sellerView All
Description
PRODUCT INFORMATION OF Omron Omron long-distance photoelectric sensor EE-SPW321.
| Sensing distance | 300 mm *1 | ||
|---|---|---|---|
| Sensing object | Opaque: 2 mm dia. min. *2 | ||
| Directional angle | 10° to 40° | ||
| Light source | GaAs infrared LED (pulse lighting) with a peak wavelength of 940 nm | ||
| Indicator | Light indicator (Red LEDs, one each on Sensor and Amplifier) | ||
| Supply voltage | 12 to 24 VDC ±10%, ripple (p-p): 5% max. | ||
| Current consumption | Average: 30 mA max. | ||
| Control output | NPN open collector, Load power supply voltage: 12 to 24 VDC, Load current: 100 mA max., OFF current: 0.5 mA max. Residual voltage: 1 V max (at a 100-mA load current) |
||
| Response time | 1 ms max. for both detection and reset | ||
| Ambient illumination | 3,000 lx max. (incandescent light); 10,000 lx max. (sunlight) on the receiver | ||
| Ambient temperature range | -20 to +55°C | ||
| Ambient humidity range | 5% to 85% | ||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions | ||
| Shock resistance | 500 m/s2 | ||
| Degree of protection | IEC IP64 | ||
| Connecting method | Pre-wired (standard cable length: 2 m) | ||
| Cable length from emitter (receiver) to amplifier |
0.5 m | 1 m | |
| Weight (Packaged) | 76 g | ||
| Material | Case | ABS resin | |
| Lens | Acrylate resin | ||
| Accessories | Slits: One sheet with 16 total slits (0.5 × 3 mm, 1 × 3 mm, 3 × 0.5 mm, 3 × 1 mm; four each) included Sems screws with spring washers and flat washers: Six M2.6 × 12 Instruction Manual |
||
0.0 Average Rating Rated (0 Reviews)