More items from this sellerView All

Keyence digital photoelectric sensor amplifier PS-N11N.

0 reviews

Keyence digital photoelectric sensor amplifier PS-N11N.Model No: PS-N11N.Amplifier Unit, Cable Type, Main Unit, NPN.

Description

PRODUCT INFORMATION OF Keyence digital photoelectric sensor amplifier PS-N11N.

Model PS-N11N
Type Cable
Output NPN
Main unit/Expansion unit Main unit
I/O Control outputs 1 output
External input 1 input
Output selection LIGHT-ON/DARK-ON (switch-selectable)
Timer function Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer, Timer duration selectable: 1 ms to 9999 ms, Maximum error against the setting value: ±10% max.
Control output NPN open collector 30 V, (without expansion) 100 mA max., (with expansion) 20 mA max,
residual voltage 1 V max. (when the out current is 10 mA or less)/2 V max. (when the output current is 10 to 100 mA)
Number of interference prevention units 4 for TURBO/SUPER/ULTRA/MEGA (When set to DOUBLE, the number of interference-prevention units will be doubled)
Response time 500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
External input Input time 2 ms (ON)/20 ms (OFF) or more*1
Case size H 32.6 mm 1.28″× W 9.8 mm 0.39″ × L 78.7 mm 3.1″
Unit expansion Up to 16 units (Up to 17 units including 1 main unit can be connected in total.)
Protection circuit Reverse polarity protection, Over-current protection, Surge absorber
Rating Power voltage 24 VDC (operating voltage 10 to 30 VDC (with ripple)), Ripple (P-P) 10 % or less, Class 2 or LPS
Power consumption Normal: 810 mW or less (at 30V. 28 mA max. at 24 V, 34 mA max. at 12 V)
Eco on mode: 700 mW or less (at 30V. 24 mA max. at 24 V, 27 mA max. at 12 V) Eco Full mode: 490 mW or less (at 30V. 17 mA max. at 24 V, 20 mA max. at 12 V)
Environmental resistance Ambient temperature -20 to +55 °C -4 to 131 °F (No freezing)*2
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm 0.06″, 2 hours in each of the X, Y, and Z directions
Shock resistance 500 m/s2, 3 times in each of the X, Y, and Z directions
Material Case Main unit and cover material: Polycarbonate
Cable PVC
Weight Approx. 75 g

0.0 Average Rating Rated (0 Reviews)

Rated
0%
Rated
0%
Rated
0%
Rated
0%
Rated
0%

Be the first to review “Keyence digital photoelectric sensor amplifier PS-N11N.”

Your email address will not be published. Required fields are marked *

You have to login to add images.