NEW-INFRAME-REBUILD-KIT-FOR-CATERPILLAR-C15.png
NEW-INFRAME-REBUILD-KIT-FOR-CATERPILLAR-C15-2.png
NEW-INFRAME-REBUILD-KIT-FOR-CATERPILLAR-C15-3.png

More items from this sellerView All

INFRAME REBUILD KIT FOR CATERPILLAR 3406E, C15, C16 | NEW #MCIF1807352

Category: Tags: ,

0.00৳ 

0 reviews

INFRAME REBUILD KIT FOR CATERPILLAR 3406E

Description

TECHNICAL DATA

Engine Specifications:
3406E Engine Specifications:
Year: 1993-2005
CID: 893
Cylinders: L 6
Bore/Stroke: 5.4000-5.4020″ (137.16-137.211 MM)6.500″ (165.100 MM)
Compression Ratio: 14.5:1
Firing Order:1-5-3-6-2-4Tune-Up Specifications:
Oil Pressure –
Oil Pressure at Idle: –
Intake Valve Lash:.012-.018″ cold
Exhaust Valve Lash: .027-.033″ cold
Lash Adjustment Method: Adjusting Screw
NOTE: DIESEL 3406E TRUCK, OHC, 24 VALVE, 5DS-1LWCasting Numbers:
152-7648 – Block
136-7329 – Block
4P9121 – Crankshaft, 1.891-1.899 Thrust, 48 RC Min Journal Hardness
7N9146 – Flywheel, Min thickness 1.9200″ Used in Ford Trucks
4W6707 Flywheel
4P1599 – Head
10R4359 – Head
9Y6048 – Rod
6N3911 – Rod
7E5996 – Rod
8N1726 – Rod
9Y6054 – Rod
1608178 – Rod
7N3229 – Rod
8N1728 – RodC15 Engine Specifications:
Year: 1999-2007
CID: 928
Cylinders: L 6
Bore/Stroke: 5.4000-5.4020″ (137.160-137.210 MM)6.732″ (171.000 MM)
Compression Ratio: –
Firing Order:1-5-3-6-2-4

Tune-Up Specifications:
Oil Pressure –
Oil Pressure at Idle: –
Intake Valve Lash: .015″ (.381 MM)
Exhaust Valve Lash: .030″ (.762 MM)
NOTE: DIESEL 3406E TRUCK, OHC, 24 VALVE, 5DS-1LW

Casting Numbers:
1390537 – Camshaft
1439153 – Camshaft
2162818 – Camshaft
2252612 – Camshaft
4P9121 – Crankshaft
5M030120 – Crankshaft, Acert engine
221-9358 – Crankshaft , 3.8188″ Rod Journal Diameter
195-0312 – Crankshaft , 3.8188″ Rod Journal Diameter
4N2514 – Flywheel
10R4359 – Head
9Y6054 – Rod, PIN SIZE 2.167″
2243245 – Rod, PIN SIZE 2.3639″
2243244 – Rod, PIN SIZE 2.3639″

C16 Engine Specifications:
Year: –
CID: 955
Cylinders: L 6
Bore/Stroke: 5.4984-5.5004″ (139.660-139.710 MM)6.750″ (171.450 MM)
Compression Ratio: –
Firing Order:1-5-3-6-2-4

Tune-Up Specifications:
Oil Pressure: 88 PSI MAXIMUM
Oil Pressure at Idle: 14.5 PSI MINIMUM
Intake Valve Lash: .012-.018″
Exhaust Valve Lash: .027-.033″ (.680-.840 MM)

Casting Numbers:
132-1116 – Crankshaft , C-16
10R4359 – Head
9Y6054 – Rod

Torque Specifications:
** 1.752 MIN THICKNESS ON FLAT FLYWHEELS FROM THE MOUNTING SURFACE-THE FACE OF FLYWHEEL.

 

Having problems with your Caterpillar 3406E? A new rebuild kit from HHP may be just what you need!
Extend the life expectancy of your Caterpillar 3406E with a quality rebuild kit from the certified diesel experts. All engines hit this point eventually – you need a rebuild kit to keep things running. So where do you go? Naturally, you try the OE rebuild kit. It’s pricey, but it has everything you need, right? Believe it or not, some OE rebuild kits come with used parts. Would you do an engine overhaul with used parts? No way.
We believe in only using new, high quality parts in our Caterpillar 3406E inframe rebuild kits. Each part follows OE specifications and tolerances, so you’re getting the best quality without breaking the bank. Our Caterpillar 3406E inframe rebuild kits are manufactured in an ISO 9001 certified facility, and are built with hard-wearing materials for long-lasting durability.
As an added bang for your buck, each Caterpillar 3406E inframe rebuild kit comes with zero core charge and support from our ASE-certified technicians who are available to answer any of your questions from purchase to installation. With technical knowledge, quality products, fast shipping, and unbeatable customer service, HHP is the place to be.
Kit Contents:

 

  • Caterpillar 3406E Rebuild Kit
    • (6) Cylinder Kits
      • (6) Piston Skirts
      • (6) Single Cylinder Liner Gasket Sets
        • (6) Cylinder O-Ring Seals
        • (6) Cylinder O-Ring Seals
        • (6) Cylinder O-Ring Seals
        • (6) Liner Bands
      • (6) Piston Pins
      • (6) Piston Crowns
      • (6) Cylinder Liners
      • (12) Piston Pin Retainers
      • (6) Piston Ring Sets
        • (6) Top Piston Rings
        • (6) Intermediate Piston Rings
        • (6) Oil Piston Rings
    • (2) Thrust Plates
    • (7) Main Bearings
    • (6) Rod Bearings
    • (1) Upper Gasket Set In Chassis
      • (1) Air Inlet Manifold Gasket
      • (1) Seal
      • (1) Regulator Gasket
      • (1) O-Ring Seal
      • (6) Exhaust Manifold Gaskets
      • (1) O-Ring Seal
      • (1) O-Ring Seal
      • (1) O-Ring Seal
      • (1) Integral Seal
      • (6) Exhaust Manifold Gaskets
      • (1) Regulator Gasket
      • (1) Drain back Seal
      • (24) Valve Stem Seals
      • (6) O-Ring Seals
      • (6) O-Ring Seals
      • (1) Turbocharger Gasket
      • (1) Cylinder Head Shim
      • (6) O-Ring Seals
      • (6) O-Ring Seals
      • (3) Rocker Cover Seals
      • (1) Gasket
      • (1) General Use O-Ring Seal
      • (6) O-Ring Seals
      • (2) O-Ring Seals
      • (1) Cylinder Head Gasket
      • (1) General Use O-Ring Seal
      • (24) Water Grommets
      • (2) Thermostat Seals
      • (2) General Use O-Ring Seals
      • (2) One Piece Oil Pan Gaskets
      • (1) Regulator Housing Gasket
      • (1) O-Ring Seal
      • (2) O-Ring Seals
      • (1) 9MT Valve Cover Seal Stock
      • (1) O/P O-Ring Seal
      • (1) O/P O-Ring Seal
      • (2) O-Ring Seals
      • (1) O-Ring Seal
      • (1) O-Ring Seal
      • (1) Seal
      • (1) O-Ring Seal
      • (5) O-Ring Seals
      • (1) O-Ring Seal
      • (1) O-Ring Seal
      • (2) O-Ring Seals
      • (12) O-Ring Seals
      • (1) O-Ring Seal
      • (6) O-Ring Fuel Injector Seals
      • (6) O-Ring Injector Tube Seals
      • (1) Regulator Housing Gasket

0.0 Average Rating Rated (0 Reviews)

Rated
0%
Rated
0%
Rated
0%
Rated
0%
Rated
0%

Be the first to review “INFRAME REBUILD KIT FOR CATERPILLAR 3406E, C15, C16 | NEW #MCIF1807352”

Your email address will not be published. Required fields are marked *

You have to login to add images.

Related products

More Products