| Model |
KL-32CX |
| General specifications |
Disconnection error output load |
30 VDC, 0.1 A or less, residual voltage: 1 V or less |
| Vibration resistance |
10 to 55 Hz, 1.5 mm or less double amplitude for 2 hours in each of the X, Y, and Z directions; 1 G when attached to a DIN rail |
| Insulation system |
Photocoupler isolation |
| Power voltage |
10.8 to 26.4 VDC (for the connector type I/O unit, this is supplied by the dedicated cable) |
| Operating ambient temperature |
0 to 60°C |
| Operating ambient humidity |
35 to 85%RH (no condensation) |
| Operating environment |
No corrosive gas present |
| Noise immunity |
Power supply common: 1,500 V, power supply normal: 500 V, pulse width: 1 ms, 50 ns (by way of a noise simulator) |
| Withstand voltage |
500 VAC for 1 minute (between the power supply terminal and the I/O terminals; excluding the ERR output terminal) |
| Insulation resistance |
20 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and the input terminals; excluding the ERR output terminal) |
| Performance specifications |
Input maximum rating |
DC26.4V |
| Input voltage |
24 VDC, 5.3 mA (24 V mode); 5 VDC, 0.9 mA (5 V mode) |
| Minimum ON voltage |
19 V (24 V mode), 2.5 V (5 V mode) |
| Maximum OFF current |
2 mA (24 V mode) |
| Maximum OFF voltage |
0.8 V (5 V mode) |
| Input impedance |
4.3 kΩ |
| Number of inputs/outputs |
32, connector-type DC input |
| Internal current consumption |
120mA or less |
| Weight |
approx 110g |
0.0 Average Rating Rated (0 Reviews)